Unlocking The Sfp Module Latch - Wire Variety; Small Form-Factor Pluggable (Sfp) Module - IBM TotalStorage DS4400 User Manual

Wire tab
Protective cap
o
90
Figure 48. Unlocking the SFP module latch - wire variety
Attention: When you handle static-sensitive devices, take precautions to
avoid damage from static electricity. For details about handling static-sensitive
devices, see "Handling static-sensitive devices" on page 41.
4. With the SFP latch in the unlocked position, extract the SFP module.
v For SFP modules that contain plastic tabs, slide the SFP module out of the
port.
v For SFP modules that contain wire tabs, grasp the wire latch and pull the
SFP module out of the minihub port.
5. Replace the protective cap on the SFP module.
6. Unpack the new SFP module.
7. Remove the protective cap from the SFP module, as shown in Figure 49.
Plastic tab
Protective cap
Figure 49. Small Form-Factor Pluggable (SFP) Module
8. Insert the SFP module into the mini-hub port until it clicks into place.
SFP module
SFP module
Chapter 3. Replacing DS4400 Storage Server components
61