Call Channel Programming - Icom IC-M32 Instruction Manual

4
BASIC OPERATION

■ Call channel programming

The call channel key is used to select Channel 9 by default,
however, you can program your most often-used channel in
each channel group for quick recall.
q Push [CH/WX
•U/I/C
several times to select the de-
sired channel group (USA, INT,
CAN) to be programmed.
w Push [16 ] for 1 sec. to select the
•9
call channel.
• "CALL" and call channel number ap-
pear.
e Push [16 ] again for 3 sec. (until
•9
a long beep changes to 2 short
beeps) to enter call channel pro-
gramming condition.
• Call channel number to be pro-
grammed flashes.
r Push [Y]/[Z] to select the desired
channel.
12
] for 1 sec.
t Push [16 ] to program the dis-
•9
played channel as the call chan-
nel.
• The call channel number stop
flashing.