Setting The Vox Gain - Icom IC-F27SR Instruction Manual

D Setting the VOX gain
The VOX sensitivity level can be adjusted from 1 (minimum) to 10
(maximum). Higher values make the VOX function more sensitive
to your voice.
IMPORTANT!
✓
Set the microphone gain before setting the VOX gain. (p. 15)
Connect the
q
HS-95 or HS-97 headset
the OPC-2004. (p.
Rotate [VOL] to t
w
transceiver power.
Set [ROTARY SELECTOR] to
e
Channel 16.
While holding down [PTT] and
r
[Upper], rotate [VOL] to turn ON
the power and enter the VOX
gain adjustment mode.
Push [Upper] to increase, or
t
push [Lower] to decrease
VOX gain while speaking into the
optional headset.
• The adjustable range is 1 (minimum) to 10 (maximum).
• A beep sounds after pushing [Upper] or [Lower].
If the level is set on 1 or 10, an error beep sounds after pushing.
Therefore, you can determine the current level setting by the type
of beep that sounds.
y Rotate [VOL] to turn OFF the power, then turn ON again to exit
the VOX gain adjustment mode.
NOTE: This operation may not be available, depending on the
preprogramming. Ask your dealer for details.
optional HS-94,
and
)
34
urn OFF the
the
[ROTARY SELECTOR]
[PTT]
[Upper]
[Lower]
6
OPTIONS
[VOL]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
36