Channel Selection - Icom IC-F27SR Instruction Manual

3
OPERATION

■ Channel selection

Several types of channel selecting methods are available. They
may differ, according to your system set up.
To select a desired operating channel, do one of the following:
• Rotate [ROTARY SELECTOR].
• Push one of memory channel keys, [MR-CH 1] to [MR-CH 4].
AUTOMATIC SCAN TYPE:
Selecting a channel is not necessary for this type. When turning the
power ON, the transceiver automatically starts scanning. Scanning
stops when a signal is received, and then the channel is set.
NOTE: If the Move to Priority A channel at Power ON function
(p. 17) is turned ON, the transceiver does not start scanning at
power ON, and the Priority A channel is automatically selected.
11