Power Supply Connection; Mounting The Repeater; D Using The Supplied Handles - Icom IC-FR5000 Instruction Manual

■ Power supply connection

Make sure the repeater's power switch is turned OFF
when connecting a DC power cable.
R WARNING! Voltages greater than 16 V DC will
damage the repeater. Check the source voltage be-
fore connecting the power cable.
INSTALLATION AND CONNECTIONS

■ Mounting the repeater

D Using the supplied handles

The handles are convenient for mounting the repeater
into a 19 inch rack. The handles can be installed on
the repeater's front panel.
q Attach the handles to both sides of the repeat-
er's front panel with the spacers, then tighten the
screws.
Handle
w The completed installation should look like this.
2
P 0
P 1
P 2
P 3
P 4
Screw
Spacer
P 0
P 1
P 2
P 3
P 4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
6