Power Up And Power Down - Vivotek ND8321N User Manual

Power Up and Power Down

To power up and power down,
On the initial configuration:
1. Connect the power adapter between the system and power outlet.
2. Turn on the system by pressing the power button for more than one second.
After the initial connection,
1. Press the power button for 1 second to power on.
2. Press the power button for 4 second to power down. the system should start flushing the
cache contents in system memory and gracefully shut down.
WARNING:
1. No storage system is completely fail-safe. Damage to data might occur due to file system
corruption, operating system malfunction, virus infection, HDD component failures, and so on.
Therefore, it is highly recommended to regularly back up your data, and VIVOTEK disclaims
responsibilities of data loss or recovery.
2. Always power off the system using the power button. Do not disconnect the power cord while
the system is still operating. Doing so will result in data inconsistencies. The normal power-off
procedure allows cached data to be written to disks.
NOTE:
If system buzzer is sounded, turn it off in Settings > Logs > Error page. Click the Stop buzzer
sound button.
Serious system faults, such as a missing volume, can trigger the system buzzer. Verify the
cause of system fault and turn off the buzzer.
On a local console, go to the Settings
window, a Mute button is available there.
VIVOTEK - Built with Reliability
User's Manual - 19