5-6. Alarm
5-6-1. General
The events reported from individual cameras' digital inputs, digital outputs, and motion detection
can be accommodated in the NVR system's alarm settings. These events will then be reported
or trigger corresponding actions as follows:
1. Reporting events via Email or system buzzer.
2. Triggering video snapshot and text message by the occurrences of events to an FTP/HTTP
site.
3. Triggering the camera(s) for its lens to move to a preset position.
4. Triggering the cameras' digital output.
You can create up to 16 instances of alarm.
Hardware connections to DIs or DOs, e.g., window sensors, should be made separately. The
motion detection configuration can be made in the Camera configuration window.
VIVOTEK Network Cameras
6
Preset positions
Events triggered
4
FTP
5
HTTP
3
Buzzer
VIVOTEK - Built with Reliability
Digital input/output
Motion detection
LAN/WAN
Alarms
ND8321
1
Event-triggered
recording
7
Web Console
2
Email
User's Manual - 149