1
OFF
3. NET
2
Orange
1
Solid
4. Wi-Fi
2
Solid
3
Blinking
0.2 second
4
OFF
1
Blinking
5. WPS
2
OFF
Power Up and Power Down
To power up and power down,
On the initial configuration:
Connect the power adapter between the system and power outlet. To power
up after a power-down, re-connect the DC connector.
After the initial connection,
Press the software power down button on the management session to power
down. the system should start flushing the cached contents in system
memory and gracefully shut down.
* Configured disk drive is missing
( the buzzer will be sounded until it
is manually disabled.)
The Ethernet port is disconnected.
blinking
Data is being transmitted and
received.
Green
Working in the AP mode.
Orange
Working in the Station mode, and
is connected to an AP.
Orange
every
Working in the Station mode, and
failed to connect to an AP.
Wi-Fi is off.
Blue
WPS is searching for nearby
devices.
WPS is not functioning.