Table of Contents
Advertisement
3-4-8. Settings - Alarm - Alarm
The events reported from individual cameras' digital inputs, digital outputs, and motion detection
can be accommodated in the NVR system's alarm settings. These events will then be reported
or trigger corresponding actions as follows:
1. Reporting events via Email or system buzzer.
2. Triggering video snapshot and text message by the occurrences of events to an FTP/HTTP
site.
3. Triggering the camera(s) for its lens to move to a preset position.
4. Triggering the cameras' digital output.
You can create up to 10 instances of alarm.
Hardware connections to DIs or DOs, e.g., window sensors, should be made separately. The
motion detection configuration can be made in the Camera configuration window.
When an alarm is triggered, a message prompt
will appear on the Liveview or any configuration
window.
Below is a glimpse of alarm sources and alarm actions:
Sources
DI
DO
Motion detection
VIVOTEK - Built with Reliability
Actions
►
Video recording
Email
Buzzer
FTP
HTTP
Camera preset points
Camera DO
►video footage
►snapshots
►snapshots
►messages
User's Manual - 61
Advertisement
Table of Contents
