Interface Connections - Vivotek ND8321N User Manual

Interface Connections

1. Connect to a monitor using an HDMI cable.
2. Connect CAT5e or better-quality Ethernet cable to cameras via a local, switched network, or
clients through the Internet. Refer to next page for more information.
3. Connect USB devices such as, mouse, keyboard, USB optical drive, or USB thumb drive (for-
matted in FAT format), or UPS.
4. Connect the power adaptor to the power mains and the system.
1
NOTE:
Although the system supports MAC Binding, the system should be able to detect VIVOTEK's
cameras within the network regardless of the presence of a DHCP server. Ideally, cameras
and the NVR should reside in the same subnet. If a camera's IP is changed for some reasons,
the system should be able to detect its new IP.
VIVOTEK - Built with Reliability
Router
LAN / WAN
2
4
3
User's Manual - 11