Power Up And Power Down - Vivotek ND9312 User Manual

8

Power Up and Power Down

To power up and power down,
On the initial configuration:
Connect the power adapter between the system and power outlet. To power up after a power-
down, re-connect the DC connector.
After the initial connection,
Press the software power down button on the management session to power down. The
system should start flushing the cached contents in system memory and gracefully shut down.
WARNING:
1. No storage system is completely fail-safe. Damage to data might occur due to file system
corruption, operating system malfunction, virus infection, HDD component failures, and so on.
Therefore, it is highly recommended to regularly back up your data, and VIVOTEK disclaims
responsibilities of data loss or recovery.
2. Always power off the system using the software power button. Do not disconnect the power
cord while the system is still operating. Doing so will result in data inconsistencies. The
normal power-off procedure allows cached data to be written to disks.
NOTE:
If system buzzer is sounded, move your mouse cursor to reveal the main screen portal, and
then click on the Stop buzzer button.
Serious system faults, such as a missing volume, can trigger the system buzzer. Verify the
cause of system fault and turn off the buzzer.
VIVOTEK - Built with Reliability
User's Manual - 33