Table of Contents
Advertisement
VIVOTEK - Built with Reliability
3-4-10. Settings - System - Information
On this window, you can configure the following:
1. Change the system name.
2. Select the UI text language.
3. Configure system time, time zone, and if you are connected to a DNS server where
Auto Daylight Saving time can be applied, you can acquire the associated setting from
a server within your network.
4. Click the Apply button for the configuration to take effect.
Note that if NTP time server configuration (Auto) is preferred, you should configure
all of your cameras to listen to the same time server as those shown in the pull-down
menu. You need to configure camera settings over a web console, and set up the same
configuration in the System > General settings > System time page. The precondition
is that the system must have access to the Internet.
70 - User's Manual
Advertisement
Table of Contents
