Hardware Installation - Vivotek ND8321N User Manual

IMPORTANT:
It is important to leave a clearance of 10cm to the rear
side of the chassis. The clearance is required to ensure
an adequate airflow through the chassis to ventilate
heat.
To ensure normal operation, maintain ambient airflow.
Do not block the airflow around chassis such as placing
the system in a closed cabinet.

Hardware Installation

3
SATA hard disk(s) are user-supplied. The network video recorder can readily accommodate
most of the off-the-shelf SATA hard drives.
1. Use a screwdriver to loosen the retention screw on the rear of the chassis.
2. Slide the top cover back, and then remove the top cover.
VIVOTEK - Built with Reliability
2
10cm
1
User's Manual - 9