Table of Contents
Advertisement
Section 3 - Configuration
This section will show you how to configure your new D-Link Powerline AV using the web-based configuration utility.
Power Saving:
Enable Power Save mode.
Network
You can set the name of your network to make it
Name:
either public or private. Make sure the Network
Name of all of the devices within your Powerline
network is the same.
Public
Select this option if you would like to set your
Network
Powerline network public with the default
Name:
Network Name of "HomePlugAV". Since this is a
commonly used network name, it is less secure
than a private Network Name.
Private
Select this option if you wish to make your
Network
Powerline network more secure by using a
Name:
private Network Name.
Network List:
This section provides information on the
Powerline AV devices on your Powerline
network.
Scan:
Click this button to scan for new Powerline
devices. This is automatically done periodically
and upon loading this page.
QoS Settings:
Here you can set the Quality of Service (QoS)
settings for each network device. QoS helps you
prioritize network traffic based on device or the
port the traffic is on.
MAC Address/
Select a device from the Computer Name dropdown box and then click the << next to Computer Name to automatically fill in
Port Number:
the device's MAC Address. Or, set the priority for the device under the Priority dropdown box. Clear settings for a rule with the
Clear button. Remember to click Save Settings after making changes.
D-Link DHP-W313AV User Manual
PLC Settings
21
Advertisement
Table of Contents
