Section 3 - Configuration
Access Point Mode Settings
This page lets you configure the settings to use the DAP-X1860 as an access point. Connect an Ethernet cable from your router's
LAN port to the LAN port at the bottom of the DAP-X1860.
To access this page, click the Settings drop-down menu at the top of the page, and select Extender. Click Save to apply the settings
and return to the home page.
Under Existing Network, choose Ethernet to utilize the DAP-X1860 as an access point. Refer to "Extender Settings" on page 28 for
more information regarding configuration options.
D-Link DAP-X1860 User Manual
23