Table of Contents
Advertisement
AUTODOME 5000 Analog PTZ Camera
Alarm Pin
Alarm Switch
Alarm Type
Alarm Action
Preset Point
Dwell Time
Alarm Priority
Alarm Output
Exit
Alarm Pin
The camera supports up to four sets of alarm inputs. Select an alarm input pin number to
setup its related parameters. For pin definitions of the alarm connector, refer to the section
Alarm Type.
Notice!
If two or more alarm pins are triggered at the same time and their alarm priority numbers are
the same, then the alarm pin with the smaller number will have higher priority to be handled.
For example, if Alarm-1 and Alarm-3 are triggered simultaneously, only Alarm-1 will actually be
handled.
Alarm Switch
Use this option to enable (ON) or disable (OFF) the selected alarm pin.
Alarm Type
There are two different alarm types: Normally Open and Normally Closed, which are illustrated
below. Select an alarm type that corresponds with the alarm application.
Bosch Security Systems, Inc.
ALARM SETTING
01
OFF
NO
Preset
01
003 Sec
1
1+2
Yes
Operations Manual
On-Screen Display (OSD) Menu | en
53
2013.07 | 1.3 |
Advertisement
Table of Contents
