Table of Contents
Advertisement
44
en | On-Screen Display (OSD) Menu
Preset Tour Point
Up to 64 points can be setup for each Preset Tour. The Preset Tour Points represent order of
the preset points that the camera will run automatically. The following setup items, including
PRESET POSITION, SPEED and DWELL TIME influence how the camera runs through each
preset tour point.
Preset Position
Assign a specific preset position to the selected Preset Tour Point . Options include <1> to
<99> and <END>. END is used for the Preset Tour Point following the last Preset Tour Point
when the amount of preset tour points (the previous menu item) is less than 64.
Notice!
If you will not use all 64 points, set the point following the last Preset Tour Point as <END> so
that the preset tour can work properly. For example, if you intend to set a Preset Tour with 5
preset tour points, you must set the PRESET POSITION of Preset Tour Point 06 as <END>.
Warning!
!
To set more than one Preset Tour Point or Preset Position, you must exit the Preset Tour
menu and access it again to set the next Point or Position.
Speed
You can set the pan/tilt speed of the camera from one Preset Tour Point to the next, and the
range of setup speed is from 1 to 15. Within the range, PAN speed varies from 10 to 360
(degree/sec.), and TILT speed varies from 8 to 360 (degree/sec.).
Dwell Time
The Dwell Time is the duration of time that the camera will stay at a Preset Tour Point, and the
range is from <000> to <127> seconds. The camera will go to the next preset tour point when
the Dwell Time expires. If the setting is <000>, the camera will stay at this Preset Tour Point
for less than 1 second and then shift to the next point.
Currently, the default dwell time is 0 seconds. You must change the numeral to set any other
duration of dwell time.
Run Preset Tour
You can command the camera to run the selected Preset Tour manually. Press the <CAMERA
MENU> key to execute a preset tour.
Notice!
You can execute the Preset Tour function through a control keyboard. Refer to the control
keyboard's quick guide for further information.
6.12.4
Preset
You can define preset points in this menu.
Preset Set
Preset Run
Exit
2013.07 | 1.3 |
PRESET
01
01
YES
Operations Manual
AUTODOME 5000 Analog PTZ Camera
Bosch Security Systems, Inc.
Advertisement
Table of Contents
