Grandstream Networks HandyTone-488 User Manual page 34

HandyTone-488 User Manual
Special Features
Onhook Threshold
FXS Impedance
Caller ID Scheme
Onhook Voltage
Polarity Reversal
Distinct Ring Tones Using these settings, user can configure ring or tone frequencies according to
Volume
Amplification
FXO port page
STATUS
SIP Server:
Outbound Proxy:
SIP User ID:
Authenticate ID:
Default is Standard. Choose the selection to meet some special requirements
from Soft Switch vendors like Nortel, Broadsoft, etc.
Default setting is 800ms. If the flash event is longer than the settings, it is
processed as on-hook event.
Selects the impedance of the analog telephone connected to the Phone port.
Select the Caller ID Scheme to suit the standard of different area.
• Bellcore (North America)
• CID - Canada
• DTMF (Brazil)
• DTMF (Sweden)
• DTMF (Denmark)
• ETSI-DTMF (Finland, Sweden)
• ETSI-FSK (France, Germany, Norway, Taiwan, UK-CCA)
Select the onhook voltage to suit the analog phone.
Select Polarity Reversal to adapt some call charge/billing system. Default is
No.
their preference. By default they are set to North American frequencies.
Frequencies should be configured with known values to avoid uncomfortable
high pitch sounds. ON is the period of ringing ("On time" in 'ms') while OFF
is the period of silence. In order to set a continuous ring, OFF should be zero.
Otherwise it will ring ON ms and a pause of OFF ms and then repeat the
pattern.
Handset volume adjustment. RX is for receiving volume, TX is for
transmission volume. Default values are 0dB for both parameters. +6dB
generates the highest volume and -6dB generates the lowest volume.
Grandstream Device Configuration
BASIC
SETTINGS
sip.mycompany2.com
if any)
987654321
987654321
ADVANCED FXS
SETTINGS PORT
(e.g., sip.mycompany.com, or IP address)
(e.g., proxy.myprovider.com, or IP address,
(the user part of an SIP address)
(can be identical to or different from SIP
34
Grandstream Networks, Inc.
FXO
PORT