Advanced User Configuration - Grandstream Networks HandyTone-488 User Manual

HandyTone-488 User Manual
DMZ IP:
Port Forwarding:
Number of rings
PSTN access code
PIN for PSTN calls
PIN for VoIP calls
Route Call to PSTN
Forward to PSTN
Forward to VoIP
6.2.3

Advanced User Configuration

To login to the Advanced User Configuration page, please follow the instructions in section 6.2.1 to
get to the following login page. The password is case sensitive and the factory default password for
Advanced User is "admin".
Advanced settings
STATUS
Admin Password:
Home NPA:
Layer 3 QoS:
Layer 2 QoS: 802.1Q/VLAN Tag
Forward all WAN IP traffic to a specific IP address if no matching port is
used by HandyTone-488 itself or in the defined port forwarding.
Allow users to forward a matching (TCP/UDP) port to a specific LAN IP
address with a specific (TCP/UDP) port.
Default is 4. It specifies number of phone rings before a PSTN incoming call
is bridged to VoIP
The code to access the PSTN line. Default is "*00".
PIN code to bridge from VoIP to PSTN
PIN code to bridge from PSTN to VoIP
If the dialed digits match one of the specified prefix here, outbound calls will
be initiated from PSTN line. This field is especially useful for emergency
calls.
Calls are unconditionally forwarded to the specified PSTN phone number for
all incoming VoIP calls on FXO port.
Calls are unconditionally forwarded to the specified VoIP phone number for
all incoming PSTN calls.
Grandstream Device Configuration
BASIC ADVANCED
SETTINGS
protection)
48
(Diff-Serv or Precedence value)
FXS PORT FXO PORT
SETTINGS
(purposely not displayed for security
0
802.1p priority value
25
Grandstream Networks, Inc.
0
(0-7)