Grandstream Networks HandyTone-488 User Manual page 24

Analog telephone adaptor
Hide thumbs Also See for HandyTone-488:
Table of Contents

Advertisement

HandyTone-488 User Manual
Daylight Savings Time This parameter controls whether the displayed time will be daylight savings
Cloned WAN MAC
Address:
LAN Subnet Mask
LAN DHCP Base IP:
DHCP IP Lease Time: Value is set in units of hours. Default value is 120hr (5 Days.) The time IP
time or not. If set to "Yes" and the Optional Rule is empty, then the
displayed time will be 1 hour ahead of normal time.
The "Automatic Daylight Saving Time Rule" shall have the following
syntax:
start-time;end-time;saving
Both
start-time
month,day,weekday,hour,minute
month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
day: [+|-]1,2,3,..,31
weekday: 1, 2, 3, .., 7 (for Mon, Tue, .., Sun), or 0 which means the daylight
saving rule is not based on week days but based on the day of the month.
hour: hour (0-23),
minute: minute (0-59)
If "weekday" is 0, it means the date to start or end daylight saving is at
exactly the given date. In that case, the "day" value must not be negative. If
"weekday" is not zero and "day" is positive, then the daylight saving starts
on the first "day"th iteration of the weekday (1st Sunday, 3rd Tuesday etc).
If "weekday" us not zero and "day" is negative, then the daylight saving
starts on the last "day"th iteration of the weekday (last Sunday, 3rd last
Tuesday etc).
The saving is in the unit of minutes. The saving time may also be preceded
by a negative (-) sign if subtraction is desired instead of addition.
The default value for "Automatic Daylight Saving Time Rule" shall be set to
"04,01,7,02,00;10,-1,7,02,00;60" which is the rule for US.
Examples
US/Canada where daylight saving time is applicable:
04,01,7,02,00;10,-1,7,02,00;60
This means the daylight saving time starts from the first Sunday of April at
2AM and ends the last Sunday of October at 2AM. The saving is 60 minutes
(1hour).
Allow the user to set a specific MAC address. Set in Hex format
Sets the LAN subnet mask. Default value is 255.255.255.0
Base IP for the LAN port, which functions as default gateway for its LAN.
Default value is 192.168.2.1
address are assigned to the LAN clients
and
end-time
24
Grandstream Networks, Inc.
have
the
same
syntax:

Advertisement

Table of Contents
loading

Table of Contents