Installing A Dual-Slot Model 743; Board Computer Captive Screws - HP Model 743 PC Owner's Manual

Figure 3-1

Board Computer Captive Screws

Installing a Dual-Slot Model 743

1 Put the board computer at the desired slot. Position and slide it into the
card cage until it seats properly with the front panel and front panel exten-
sion flush against the card cage.
2 Engage all captive screws (labeled 1 and 2, 3 and 4, in Figure 3-1) before
tightening each screw of the board computer and the extension panel(s).
Typical Installation in a VME Card Cage
Board Computer Installation
3
4
1
2
3-7