Australia Emc Standards Preface-3; Vcci Class A Ite Preface-3; Electrostatic Discharge (Esd) Precautions Preface-3 - HP Model 743 PC Owner's Manual

Hewlett-Packard's system certification tests were conducted with HP-sup-
ported peripheral devices and HP shielded cables, such as those you receive
with your computer. Changes or modifications not expressly approved by
Hewlett-Packard could void the user's authority to operate the equipment.
Australia EMC Standards
This equipment has applied for and received approval to display the Austra-
lian C-Tick mark according to the standards of AS/NZS 2064.1/2:1992 and
AS/NZS 3548:1995.
VCCI Class A ITE
Electrostatic Discharge (ESD) Precautions
Electrostatic charges can damage the integrated circuits on printed circuit
boards. To prevent such damage from occurring, observe the following pre-
cautions during board unpacking, installation, and configuration:
• Stand on a static-free mat.
• Wear a static strap to ensure that any accumulated electrostatic charge is
discharged from your body to ground.
• Connect all equipment together, including the static-free mat, static strap,
routing nodes, and peripheral units.
• Keep uninstalled printed circuit boards in their protective antistatic bags.
• Handle printed circuit boards by their edges, once you have removed them
from their protective antistatic bags.
Preface-3