Displaying and Setting Paths
This section provides instructions for selecting the primary path, selecting an
alternate path, and reordering the boot device list.
A path is the hardware address of a device that is attached to the I/O system
of your system.
To display the current settings for the system paths, select
Path Configuration from the Main Menu by typing the following:
2 Enter
A screen similar to the following appears:
==== PATH CONFIGURATION ======================
PRIMARY PATH
ALTERNATE PATH is now [ LAN.080009-723333 ]
CONSOLE PATH
KEYBOARD PATH is
Key
Operation
---
-----------------------------------------
1
Primary Boot Path
2
Alternate Boot Path
3
Console Path
4
Keyboard Path
... .........................................
0
Previous Menu
77
Reset the System
----------------------------------------------
Press Key, then press [Enter/Return]
Selecting the Primary Path
This section provides instructions for selecting the primary boot device path.
1 To reconfigure the primary boot device path, select Primary Boot
Path from the Path Configuration menu by entering the follow-
ing:
The Boot Console Interface
Displaying and Setting Paths
is
now [ SCSI.6.0 ]
is
now [ GRAPHICS 1 ]
now [ PS/2 (0) ]
A-17