Call Transfer; Operating With Additional Base Unit; To Find The Base Unit Automatically - Samsung SP-R5200 User Manual

Call Transfer

(This feature is available only when you have more than
one handset)
You can transfer a call from one handset to another.
1. During a telephone conversation, press INT button.
Result: Your caller will be put on hold and will hear music.
The icon blinks in your display.
2. Enter the number (1 through 6) of the handset to which you
want to transfer the call.
Result: The paged handset rings.
3. To answer the call from you, the paged handset should press
either INT or button. If the handset is on the base unit,
simply lift it up.
4. You can speak with the handset (Intercom).
5. To transfer the external call to the paged handset, press
button.
Or
To cancel the call transfer and talk with the outside party again,
press INT button.
46
Digital Cordless Telephone

Operating with Additional Base Unit

The SP-R5200 handsets may be used with up to four base
units. To use the handset with more than one base unit, you
must register the handset at each base unit. Refer to
'Registering New Handset with Base' on page 41.

To Find the Base Unit Automatically

• With the 'Auto Find' feature set to 'ON', if you are moving
around, and lose contact with the base unit, the handset
will automatically find the first available base unit.
• The feature is preset to 'OFF'.
1. Press or button repeatedly until
2. Press button.
Result: The display shows the current setting.
3. Press or button to choose 'On' or 'OFF'.
4. Press button to confirm.
appears.
Digital Cordless Telephone
47