Safety Precautions and Important Notices
When using your telephone, these basic safety precautions
should always be followed to reduce risk of fire, electric
shock, and injury.
1. Never push objects of any kind into your telephone through
case or cabinet openings. They may touch dangerous volt-
age points resulting in risk of fire or shock.
2. To reduce the risk of electric shock, do not disassemble
your telephone. Take it to a qualified service technician
when repair work is required. Opening or removing covers
may expose you to dangerous voltage or other risks.
Incorrect reassembly could cause electric shock when the
unit is subsequently used.
3. Unplug this unit from the telephone jack and wall outlet,
and refer servicing to qualified service personnel under the
following conditions:
• When the power supply cord, plug, or adaptor is dam-
aged or frayed.
• If liquid has been spilled into the product.
• If the product has been exposed to rain or water.
• If the product does not operate properly after instructions
have been followed.
• If the product has been dropped, or the cabinet appears
damaged.
• If the product exhibits a distinct change in performance.
2
Digital Cordless Telephone
4. Avoid using your telephone during a lightning storm. There
may be a remote risk of electric shock from lightning. If
possible, unplug the AC adaptor and telephone cord for the
duration of the lightning storm.
5. Never dispose of batteries in a fire. There is a serious risk
of explosion and / or the release of highly toxic chemicals.
Dispose of used batteries in accordance with local regula-
tions.
6. When going on holiday or not using the phone for a long
period of time, please disconnect the mains power from the
base and remove the batteries from the handset.
7. If the handset is not used for a long time and the battery
becomes fully discharged, please recharge the handset for
a minimum of 30 hours before using again.
8. If the battery is self-discharged because it has not been
used, the operational life of the battery may be reduced. To
recover the full storage capacity of the battery, recharge the
battery for a minimum of 30 hours and use until it is fully
discharged. This process needs to be repeated several
times.
9. This unit requires rechargeable Ni-MH batteries. Do not use
alkaline batteries.
Digital Cordless Telephone
3
Need help?
Do you have a question about the SP-R5200 and is the answer not in the manual?
Questions and answers