Table of Contents
Advertisement
Turning the Handset On/Off
When you place the handset in the base unit to charge it, the
handset automatically turns on. To turn the handset on or off
in Standby mode, follow these steps:
1. To turn on the handset when the display is off, press
button.
Result: All segments in the LCD window turn on briefly, then
the phone switches to the Standby mode. The phone is
now ready for use. The display shows the handset
number and the base number as shown below.
Handset number
2. To turn the handset off, press and hold
about three seconds until
appears, then the display turns off.
Result:
Notes:
• If you purchase an additional handset, you must register the
handset to a base. If not, the display shows
when you turn it on and the handset will not work. Refer to
'Register New Handset with Base' on page 41.
• Nothing will appear in the LCD window when battery power is
very low. You should fully charge the handset before operation.
16
Digital Cordless Telephone
Base number
button for
appears in the display.
LCD Window Icon Descriptions
Battery status icon
In range icon
Memory icon
Choosing Dial Mode
In order to provide compatibility with most telephone systems,
your phone can be set to either pulse-dialling (same as
rotary), or tone dialling (DTMF). Your phone is preset to tone
mode.
1. Press
or
button repeatedly until
2. Press
button to access the menu.
Result: The display shows the cur rent setting.
3. Press
or
button to choose the desired mode.
4. Press
button to confirm.
Line/Intercom/icon
Handset key lock icon
Volume level icon
appears.
Digital Cordless Telephone
17
Hide quick links:
Advertisement
Table of Contents
