To Select The Base Unit Manually; Troubleshooting - Samsung SP-R5200 User Manual

To Select the Base Unit Manually

You can select a base unit through which you want your
handset to operate.
1. Press or button repeatedly until
appears in the display.
2. Press button.
Result: The display shows the currently selected base number.
3. Press or button repeatedly to choose the desired base
unit.
4. Press button to confirm.
48
Digital Cordless Telephone
Tr o u b l e s h o o t i n g
Symptom
• Check that the power adapter is prop-
erly connected.
• Check that the telephone line cord is
properly connected.
No operation
• Check that the handset is fully
charged.
• Check that the handset batteries are
installed properly.
• Check that the telephone line cord is
properly connected.
No dial tone
• Check that the power adapter is prop-
erly connected.
• Check that the handset is not too far
Warning beep
from the base.
occurs when
• Check that the handset batteries are
making a call.
not in low status.
• Clean the charging points.
The handset
• Consistently short battery life may
seems to have
indicate
very short bat-
that replacement of the batteries is
tery life.
necessary.
Check
Digital Cordless Telephone
49