To Remove A Handset Registered To The Base Unit - Samsung SP-R5200 User Manual

5. Press button on the handset.
appears for a short time, then the LCD window
Result:
displays the ID of the base unit.
6. Press button.
or
Note: Do not press
accidentally ready to accept the handset, the base ID
will be shown in the display.
7. Enter 9234, the Authentication Code, which is preset at factory.
8. Press button.
Result : When the registration is properly completed, the LCD
window displays the base number on the right corner
and the handset number on the left corner of the
display.
Note: If you have registered the handset to several bases, and
the base number you select at step 3 is already used for
another base,
button, the old information is cleared and the base
number will be newly used for your newly selected base.
To keep old information, press and hold C/R button to can-
cel the setting, then start over again with a different base
number.
42
Digital Cordless Telephone
If there is another base which is
warning appears. If you press

To Remove a Handset Registered to the Base Unit

1. Press or button repeatedly until
in the display.
2. Press button.
3. Enter the PIN code.
4. Press button.
Result: The base number appears in the display.
5. Press button.
is displayed. Now, you cannot use the
Result:
handset with the base unit unless you register the
handset back to the base unit.
Note: If the handset is registered to more than one base unit,
and you want to use the handset with other base units,
you have to choose one of the other bases available.
appears
Digital Cordless Telephone
43