Product Specifications - KTI Networks KS-2601 User Manual

Managed switch
Hide thumbs Also See for KS-2601:
Table of Contents

Advertisement

A. Product Specifications
[ 24+2G fully-modularized model ]
Access Method
Standards Conformance
Communication Rate
Indicator Panel
Number of Ports
Dimensions
Certification
Input Power
Temperature
Humidity
Bridging Function
Switching Method
Address Table
Filtering/Forwarding Rate Line speed
Maximum Packet Size
Flow Control
VLAN
QoS
Spanning Tree
Trunking
Mirror Port
SNMP
Static Mac ID Access Limit Static Mac address access limit on port
802.1x
Protected Port
Rate Control
IGMP
Out-band Management
In-band Management
Software Update/Backup by TFTP protocol, Xmodem, for firmware /
Ethernet, CSMA/CD
IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE
IEEE 802.3z, IEEE 802.3ab (1000Base)
10/100/1000Mbps,
Full / Half duplex (auto-negotiation)
LEDs - each unit : Power / each port : Link/Act,
Full/Col
3* 8-port modules, 2* gigabit modules ports
440W x 254D x 44H mm
CE Mark, FCC Class A
Full range: 100 to 240V, 50 to 60 Hz
Standard Operating: 0 to 50
10% to 90% (Non-condensing)
Filtering, forwarding and learning
Store-and-forward
8K entries
1536 Bytes (tagged packet)
802.3x for full duplex, backpressure for half duplex
802.1Q VLAN, Port-based VLAN
4 priority queues per ports, for port-based/802.1P
tagged-based priority operation
Support IEEE 802.1D protocol
3 groups max.
1 capture port for Ingress/Egress traffic, DA/SA
filtering function is supported
Ver. 1, Supports MIB II(Interface), Bridge MIB,
Etherlike MIB, Private MIB
Yes, support Authentication and Transparent modes
Yes
Yes, from 64Kbps to 1000Mbps for both ingress and
egress traffic
Yes, IGMP snooping function
Console
Telnet, http, SNMP
configuration
72
o
C

Advertisement

Table of Contents
loading

Table of Contents