14. Mirror
Follow the steps to configure Mirror function.
1.
Select Enable in "Mirroring" and click [Apply] to enable the function.
2.
Select the capture port. (The monitored traffic will be forwarded to this port.)
3.
Select the monitored port from Ingress or Egress table – depending on the
traffic direction.
4.
Select the capture mode – All packets or for some special DA/SA address.
If DA/SA is selected, enter the special Mac address in "xx-xx-xx-xx-xx-xx"
format.
5.
Enter the capture frequency.
6.
Click [Apply] button.
If you want to disable Mirror function, select Disable and click [Apply].
60