Table of Contents
Advertisement
"System Configuration" is the homepage of the switch.
You can find firmware version and Mac address of the switch in this page. And
you can configure the following items in this page.
a. ARL Aging Time: You can enable/disable the aging operation of the switch
and modify the aging time here. (Default is 300 seconds.)
b. DHCP / IP Address / Network Mask / Gateway: You can set IP address
configuration of the switch here. (By DHCP or static settings)
c. Administrator Configuration: This is for network administrator to change
his/her username and password. (Default is admin/123456.)
d. Guest Configuration: This is for you to change the username and password
for Guest account. (Default is guest/123456.)
the settings of switch only. He/she cannot modify anything.
If any modification, click [Apply] to activate the new setting.
The Guest account can see
41
Advertisement
Table of Contents
