12. Protected Port Setting
The Protected Port function can isolate the traffic between these protected ports.
For example, Port 1,2,3 are marked as protected.
1,2,3 will be blocked, even they are in the same VLAN.
communicate with other ports in the same VLAN.
application of switch.
Follow the steps to enable this function and complete the setting.
1.
Select "Enable" and click [Apply] in "Protected Function".
2.
Select the ports that will be isolated from each other and click [Apply]. (You
can click [Select All] to select all ports and click [Remove All] to remove all
the selections.)
So the traffic between Port
This function is for security
58
But they still can