Table of Contents
Advertisement
6
1(0x001)
0
7
1(0x001)
0
8
1(0x001)
0
9
1(0x001)
0
10
1(0x001)
0
11
1(0x001)
0
12
1(0x001)
0
13
1(0x001)
0
14
1(0x001)
0
15
1(0x001)
0
.....................
=======================
Management Port :
1
=======================
Note: The PVID of Management Port is for the management interface of the
switch.
Only the users in the VLAN with VLAN ID equal to the PVID of
Management Port can manage the switch from network because they are in
the same VLAN.
3.3 show age command can show current aging time of switch.
For example,
>show age
Aging function: Enabled
Aging time
: 300
3.4 show arl command can show static Mac address set in ARL table and
dynamic Mac address learned in ARL table.
Its syntax is ...
>show arl
Syntax: show arl [static|dynamic].
static: show static Mac address set in ARL table
dynamic: show dynamic Mac address learned in ARL table
For example,
>show arl dynamic
[Dynamic Address Learning Table]
Item Port
Mac Address
==============================================
1) CPU
00-00-01-64-64-64
2)
8
00-00-e2-82-8c-e6
3)
4
00-20-14-95-0a-32
==============================================
3.5 show automode command will show current auto mode setting for port
configuration. It could be Auto Negotiation and Auto Detect.
For Auto Negotiation mode, the switch will do auto-negotiation ON/OFF when
the auto mode of port is enabled/disabled.
also be disabled when the auto-negotiation function of port is OFF.
VID
1(0x001)
1(0x001)
1(0x001)
But the Auto-MDIX function will
27
Advertisement
Table of Contents
