Setting Up Vpn Server Connections - HP iPAQ hx2000 User Manual

To change server settings:
1. Contact your ISP or network administrator to determine
which name resolution to use, obtain the specific server
address, and determine whether alternate addresses are
available.
Note:
primary server is unavailable.
2. Be sure the Wi-Fi is on.
3. From the iPAQ Wireless screen, tap Settings > Network
Adapters tab.
4. In the My network card connects to... dropdown box, tap
either The Internet or Work.
Note:
Internet. If you are connecting to a private network such as a
corporate network at work, you should tap Work.
5. In the Tap an adapter to modify settings box, tap HP iPAQ
Wi-Fi Adapter.
6. Tap the Name Servers tab and enter the requested
information.
7. Tap OK to save your settings.

Setting Up VPN Server Connections

A VPN connection enables you to securely connect to servers,
such as a corporate network, via the Internet. To set up a VPN
server connection:
1. Contact your network administrator for your user name,
password, domain name, TCP/IP settings, and host name
or IP address of the VPN server.
2. Tap the Connections icon (
on the Connections screen.
User's Guide
An alternate address may enable you to connect when the
If you are connecting to your ISP at home, tap The
Using Wi-Fi (not available on all models)
or ) > Settings > Task tab
8–12