HP iPAQ hx2000 User Manual page 155

(Continued)
Problem
I cannot connect
to an available
network that
shows in the list
of networks
without a name.
I cannot connect
reliably to an
available
network or
connections
are frequently
dropped.
User's Guide
Solution
It is likely that the network is a "hidden" or non-SSID
broadcast network. You must know the network name
(SSID) to be able to connect.
1. Tap Start > Settings > Connections tab >
Connections > Advanced tab > Network Card.
2. Select Add New Settings.
3. Enter the network name (SSID).
4. Select the appropriate values in the Connects to: box.
5. If WEP settings are required, tap the Authentication
tab and enter them.
Be sure there is ample signal strength available in the area.
Troubleshooting
12–9