To Change A User's Code; To Delete A User - First Alert FA1220CV User Manual

SECURITY CODES & AUTHORITY LEVELS
To Change a User's
1. Enter Master/Manager code and press the
Code
2. Enter the new code for that user.

To Delete a User

1. Enter the Master or Manager code and press the
2. Enter the same Master or Manager code again.
The system will recognize that the user number is already in use
ADD NEW USER?
and will prompt whether or not this is a new user. Enter 0 to
0 = NO , 1 = YES
change the user's code to the code entered in step 2.
The system confirms that the change is allowed based on
USER 02 CHANGED
authorization level, and if so, puts the new code into effect.
SUCCESSFULLY
Note that if changing one's own code, the system will prompt for
the new code to be reentered. This prevents accidentally changing
a high level code.
deleted.
The system will recognize that the user number is already in use
OK TO DELETE
and will prompt to confirm that it should be deleted. Press 0 (NO)
0 = NO , 1 = YES
or 1 (YES).
If yes, that user's code is removed from all partitions to which it
USER CODE
was assigned, and all authority levels and other information about
DELETED
that user is deleted. Note that a user can only be deleted from the
partition in which it was first assigned, and can only be deleted by
a user with a higher authority level. A User's security code cannot
be deleted by oneself.
– 31 –
CODE
8 key + user number to be changed.
CODE
8 key + User Number to be