Authority Levels - First Alert FA1220CV User Manual

SECURITY CODES & AUTHORITY LEVELS

Authority Levels

Authority levels define the system functions a particular user can perform. Depending on your
authority, there are certain system functions you may be prohibited from performing. There are
seven authority levels, each having certain system restrictions.
Level 1 Master:
Level 2 Manager:
Level 3 Operator A:
Level 4 Operator B: Same as Operator A, except Operator B cannot bypass zones of
Level 5 Operator C: Can arm the system in assigned partitions but cannot disarm the
Level 6 Duress:
Level 7 Limited Use : Can arm and disarm the system, but only for a predetermined number
To view your authority level and system capabilities (alpha keypads only):
1. Enter your security code +
that you are authorized to operate, and your user number and authority level in each
partition.
Can perform all system functions in assigned partitions and can add,
delete or change Manager and Operator level users. Master codes are
added by the Installer. Can also change own code.
Can perform system functions in assigned partitions and can add,
delete or change Operator level users. Can also change own code.
Can perform system functions in assigned partitions but cannot add or
delete other users.
protection.
system unless the system was armed with this code. Typically
assigned to someone who has a need to arm/disarm the system only
at certain times (such as a babysitter).
Can arm and disarm the system, but also sends a silent panic alarm to
the central station, if that service is connected.
of times, after which, this code automatically expires. The actual usage
count is set by using the #84 command discussed later in this section.
+ . The alpha keypad will display the partition(s)
– 27 –