Checking For Open Zones - First Alert FA1220CV User Manual

CHECKING FOR OPEN ZONES

Before arming your system, all protected doors, windows and other protection zones must be
Using the
closed or bypassed (see BYPASSING section). Otherwise the keypad will display a "Not
READY Key
Ready" message. Pressing the READY key will display all zones that are faulted, making it
easier for you to secure any open zones.
To show faulted zones:
DISARMED - PRESS
1. Do not enter security code, but simply press
2.
Note: Some keypads light a green LED when the system
TO SHOW FAULTS
is ready. If not lit, the system is not ready to be armed.
FAULT 05 FRONT
Typical fault display
UPSTAIRS BEDROOM
Secure or bypass the zones displayed before arming the system.
DISARMED
The "Ready" message will be displayed † when all protection zones
READY TO ARM
have been either closed or bypassed.
† NOTE: All or part of this message may be replaced by a customized
message programmed by the installer. Bear this in mind whenever the
instructions indicate that the "DISARMED" or "READY" message will be
displayed.
– 13 –
READY
.