Table of Contents
Advertisement
SECURITY
CODES & AUTHORITY
LEVELS
CODE
To Change
a
1.
User's
Code
Enter Master or Manager code and press the
q
key + user number to be changed.
2. Enter the new code for that user.
pq
The system will recognize that the user number is already in
use and will ask whether or not this is a new user. Enter 0 to
change the existing user's code to the code entered in step 3.
pEEq
The system will confirm that the change is allowed based on
authorization level, and if so, will put the new code into effect.
Note that if changing
one's own code, the system will
prompt for the new code to be reentered. This prevents
accidentally changing a high level code.
CODE
To Delete a User
1. Enter Master or Manager code and press the 181 key + User Number to be deleted.
2. Enter Master or Manager code first entered.
=I
The system will recognize that the User number is already in
use and will prompt to confirm that it should be deleted. Press
O(,,Qorl
(YES).
If yes, that user's code will be removed from all partitions to
which it was assigned, and all authorization levels and other
information about that user will be deleted. Note that a user can
only be deleted from the partition in which it was first assigned,
and can only be deleted by a user with a higher authority level.
A Usets security code cannot be deleted by oneself.
-
38
-
Advertisement
Table of Contents
