Entry/Exit Delays - First Alert FA1220CV User Manual

General
Your system has preset time delays, known as exit delay and entry delay. Whenever you arm
Information
your system, exit delay gives you time to leave through the designated exit door without setting
off an alarm. Exit delay begins immediately after entering any arming command, and applies to
all modes of arming protection. If programmed, a slow beeping will sound throughout the exit
delay period.
Entry Delay gives you time to disarm the system when you reenter through the designated
entrance door. But the system must be disarmed before the entry delay period ends, or an
alarm will occur. The keypad will beep during the entry delay period, reminding you to disarm
the system. You can also arm the system with no entry delay at all by using either INSTANT or
MAXIMUM arming modes. These modes provide greater security while on the premises or
while away for extended periods of time. See your installer for your delay times.
Partition 1
Exit Delay 1:
Exit Delay 2:
Partition 2
Exit Delay 1:
Exit Delay 2:

ENTRY/EXIT DELAYS

seconds
seconds
seconds
seconds
– 12 –
Entry Delay 1: seconds
Entry Delay 2: seconds
Entry Delay 1: seconds
Entry Delay 2: seconds