Trouble Conditions - First Alert FA1220CV User Manual

Typical "Check" The word CHECK on the keypad's display, accompanied by a rapid "beeping" at the keypad,
Displays indicates that there is a trouble condition in the system.
To silence the beeping sound for "check" conditions, press any key.
1. "CHECK" accompanied by a display of "CALL SERVICE" indicates that a problem
2. "CHECK" accompanied by a display of one or more zone descriptors indicates that a
*
Note that zone
numbers 87, 88-91,
97 and 98 represent
problems with system
components, which
are not user
serviceable. CALL
3. "COMM. FAILURE" at the Keypad indicates that a failure has occurred in the telephone
FOR SERVICE
IMMEDIATELY.
4. "SYSTEM LO BAT", accompanied by a once per minute "beeping" at the keypad indicates
5. "LO BAT" and a zone descriptor, accompanied by a once per minute "beeping" at the
** Not all systems
employ wireless
transmitters.
6. "MODEM COMM" indicates that the control is on-line with the central station's remote

TROUBLE CONDITIONS

exists with the system that eliminates some of the protection. CALL FOR SERVICE
IMMEDIATELY.
problem exists with those zone(s)*. First, determine if the zone(s) displayed are intact and
make them so if they are not. If the problem has been corrected, the display of the zone
descriptor(s) and CHECK should disappear after entering your security code + OFF. If not,
key another OFF sequence (Code plus OFF) to clear the display. If the display persists,
CALL FOR SERVICE IMMEDIATELY.
communication portion of your system. CALL FOR SERVICE IMMEDIATELY.
that a low system battery condition exists. CALL FOR SERVICE IMMEDIATELY.
keypad indicates that a low battery condition exists in the wireless transmitter** displayed.
CALL FOR SERVICE IMMEDIATELY.
computer. The control will not operate while on-line. No action is necessary.
– 39 –