Mounting The Fibre Bridge In A Rack; Table 2-1 Assembly Components - HP 2100 ER User Manual

Mounting the Fibre Bridge in a Rack

Mounting the Fibre Bridge in a rack requires assembling L-brackets to
the Fibre Bridge and then mounting the L-brackets to a rack. L-brackets
allow the Fibre Bridge to be mounted in a fixed position, near the back of
a rack.
All connections and user displays are located on the back of the Fibre
NOTE
Bridge. Consequently, mount toward the back of a rack.
Before you begin, verify you have the assembly components listed in
Table 2-1.
Table 2-1 Assembly Components
Tool
Mounting
brackets
Rackmount
screws and
nuts
Filler panel
decal
Chapter 2
Mounting the Fibre Bridge in a Rack
1 #2 Phillips screwdriver (not supplied).
1 pair L-brackets, for assembly with Fibre
Bridge.
1 package Six (6) 6x32 screws to attach Fibre Bridge
(Includes to L-brackets.
extra
Six (6) 10x32 screws and six (6) clip nuts
parts)
for installing the Fibre Bridge (with
L-brackets attached) into a rack.
1 Decal for filler panel, provided by
customer (supplied separately by rack
manufacturer).
Setting Up the Fibre Bridge
2-3