Making Configuration Changes; Figure 3-3 Fibre Bridge Configuration, Main Menu - HP 2100 ER User Manual

Making Configuration Changes

To make configuration changes, follow these steps:
1. Start your terminal emulation application software.
2. Press the
NOTE The user may need to press
Bridge to recognize the serial port settings.
Figure 3-3 Fibre Bridge Configuration, Main Menu
3. Use the Perform Configuration menu option to make changes to
Chapter 3
key. The following menu will display:
ENTER
the configuration. To select the option, type
press to display the Fibre Bridge configuration menu.
ENTER
Operating the Fibre Bridge
Making Configuration Changes
several times to prompt the Fibre
ENTER
on the keyboard and
1
3-9