Table of Contents
Advertisement
Getting Started
Receiver Panel Layout
1
2
ID
Name
1
Power
2
Link
3
IR
4
Reset
5
Switch
6
Mic In
7
Line Out
8
USB
Front
3
4
5
6
Description
This LED glows bright blue when the unit
is connected to an AC outlet and the unit is
powered ON.
This LED glows bright green when the
Sender unit and Receiver unit are connected
using CAT-5 / CAT-6 cable.
This IR sensor receives signals from the
source IR remote control.
Press this button to reset the unit.
Switches the communication channel when
using multiple Receiver units on a network.
See Setting the Video Channel for details.
Connect a microphone to this jack. If the
microphone has a 1/4" jack, use a 1/4"-to-
3.5mm adapter to connect the microphone to
the Receiver unit.
Connect a 3.5mm mini-stereo cable to a pair
of powered speakers.
Connect up two USB devices to these USB
ports.
page | 5
7
8
Advertisement
Table of Contents
