LanParty P45 T2RS User Manual page 87

Enhance Data Transmitting
The options are Auto, Normal, Fast and Turbo.
Enhance Addressing
The options are Auto, Normal and Fast.
T2 Dispatch
The options are Auto, Enabled and Disabled.
Clock Setting Fine Delay
Refer to the following pages for more information on this submenu.
Flex Memory Mode
This field is used to configure the flex memory mode.
CAS Latency Time (tCL)
This field is used to select the clock cycle of the CAS latency time.
The option selected specifies the timing delay before SDRAM starts
a read command after receiving it.
RAS# to CAS# Delay (tRCD)
This field is used to select the RAS# to CAS# delay time when
reading and writing to the same bank.
RAS# Precharge (tRP)
This field is used to select the idle clocks after issuing a precharge
command to the DRAM.
Precharge Delay (tRAS)
The options are Auto, and 9 to15.
ALL Precharge to Act
The options are Auto, and 2 to 9.
3
BIOS Setup
8 7