LanParty P45 T2RS User Manual page 40

2
Hardware Installation
LEDs
DRAM Power LED
This LED will light when the system's power is on.
Standby Power LED
This LED will light when the system is in the standby mode.
. .
.
.
.
.
.
.
40
Warning:
When the DRAM Power LED and/or Standby Power LED lit red,
it indicates that power is present on the DIMM sockets and/or
PCI slots. Power-off the PC then unplug the power cord prior to
installing any memory modules or add-in cards. Failure to do so
will cause severe damage to the motherboard and components.
DRAM
Power LED
1
Standby
Power LED