LanParty P45 T2RS User Manual page 73

Wake-Up by PCI Card
Enabled
Disabled
USB KB Wake-Up From S3
This field, when enabled, allows you to use a USB keyboard to wake
up a system that is in the S3 (STR - Suspend To RAM) state. This
can be configured only if the "ACPI Suspend Type" field is set to
"S3(STR)".
PowerOn By Alarm
Enabled
Disabled
Date (of Month) Alarm
0
1-31
Time (hh:mm:ss) of Alarm
This is used to set the time you would like the system to power-on.
This field should be set to Enabled only if your PCI
card such as LAN card or modem card uses the
PCI PME (Power Management Event) signal to re-
motely wake up the system. Access to the LAN card
or PCI card will cause the system to wake up. Refer
to the card's documentation for more information.
The system will not wake up despite access to the
PCI card.
When Enabled, you can set the time you would like
the Soft Power Down (Soft-Off) PC to power-on in
the "Time (dd:hh:mm) of Alarm" field. However, if the
system is being accessed by incoming calls or the
network prior to the time set in the field, the system
will give priority to the incoming calls or network.
Disables the automatic power-on function. (default).
The system will power-on everyday according to the
time set in the "Time (hh:mm:ss) Alarm" field.
Select a date you would like the system to power-
on. The system will power-on on the set date, and
time set in the "Time (hh:mm:ss) Alarm" field.
3
BIOS Setup
7 3