LanParty P45 T2RS User Manual page 13

This feature allows the system that is in the Suspend
W W W W W ak ak ak ak ake e e e e
mode or Soft Power Off mode to wake-up/power-on to
O n O n O n O n O n
Ring Ring
Ring Ring Ring
respond to calls coming from an external modem or re-
spond to calls from a modem PCI card that uses the
PCI PME (Power Management Event) signal to remotely wake up
the PC.
Important:
If you are using a modem add-in card, the 5VSB power source
of your power supply must support a minimum of ≥ 720mA.
This feature allows the network to remotely wake up a
W W W W W ak ak ak ak ake e e e e
Soft Power Down (Soft-Off) PC. It is supported via the
O n O n
O n O n O n
onboard LAN port or via a PCI LAN card that uses
L L L L L AN AN AN
AN AN
the PCI PME (Power Management Event) signal. How-
ever, if your system is in the Suspend mode, you can power-on the
system only through an IRQ or DMA interrupt.
Important:
The 5VSB power source of your power supply must support
≥ 720mA.
This function allows you to use the PS/2 keyboard or
W W W W W ak ak ak ak ake e e e e
PS/2 mouse to power-on the system.
O n O n O n
O n O n
PS/2 PS/2 PS/2 PS/2 PS/2
Important:
The 5VSB power source of your power supply
must support ≥ 720mA.
This function allows you to use a USB keyboard or USB
W W W W W ak ak ak ak ake e e e e
mouse to wake up a system from the S3 (STR - Sus-
O n O n O n
O n O n
pend To RAM) state.
USB USB USB USB USB
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for
2 USB ports, the 5VSB power source of your power supply
must support ≥ 1.5A. For 3 or more USB ports, the 5VSB power
source of your power supply must support ≥ 2A.
1
Introduction
13