LanParty P45 T2RS User Manual page 47

Smart Connectors
The Smart Connectors (USB, IEEE 1394 and Front Panel) serve as
extended connectors allowing you to easily connect cables to the
connectors that are on the system board. This is specially advantageous
when using the front panel connectors as this will prevent wrong cable
connection.
Front Panel Connectors
1. Connect all front panel cables
from the chassis to the front
panel smart connector. Connect
according to the pin definition
shown on the smart connector.
2. Connect the front panel smart
connector to the front panel
connector on the system board.
USB and IEEE 1394 Connectors
1. Connect your USB/1394 port cable to the USB/1394 smart connector.
Connect according to the pin definition shown on the smart connector.
2. Connect the USB/1394 smart connector to the respective connectors
on the system board.
USB 1394
Hardware Installation
Front Panel
2
47