LanParty P45 T2RS User Manual page 66

3
BIOS Setup
UR2 Duplex Mode
Half
Full
PWRON After PWR-Fail
Off
On
Former-Sts
CIR Port Address
This field is used to select an I/O address for the CIR device.
CIR Port IRQ
This field is used to select an IRQ for the CIR device.
6 6
Data is completely transmitted before receiving
data.
Transmits and receives data simultaneously.
When power returns after an AC power failure,
the system's power is off. You must press the
Power button to power-on the system.
When power returns after an AC power failure,
the system will automatically power-on.
When power returns after an AC power failure,
the system will return to the state where you left
off before power failure occurs. If the system's
power is off when AC power failure occurs, it will
remain off when power returns. If the system's
power is on when AC power failure occurs, the
system will power-on when power returns.